Operating Basics

PCR Jitter *

Displays the following PCR graphs: Inaccuracy, Arrival, Overall

 

Jitter, Frequency Offset, and Drift Rate.

 

(See page 3-48.)

SFN

Displays the Single Frequency Network (SFN) information

 

when available.

 

(See page 3-56.)

TMCC

Displays the Transmission and Multiplexing Configuration

 

Control (TMCC) and IIP information when available.

 

(Only available for ISDB streams)

 

(See page 3-57.)

SI Graphs *

Displays information about repetition rates of SI tables and

 

subtables in graphical format.

 

(See page 3-58.)

SI Tables *

Displays the SI Information for the stream.

 

(See page 3-62.)

Template *

Displays the structure and status of templates applied to the

 

stream.

 

(See page 3-68.)

Recording *

Displays the Triggered Recording setup screen.

 

(See page 3-71.)

Log

Displays the stream log.

 

(See page 3-72.)

Config

Displays general configuration parameters for the stream.

 

Administrators can modify certain parameters. Scheduling,

 

triggered recording, and interface setup are configured here.

 

(See page 3-76.)

Service Log

Displays the Service Log. Service logging allows packet counts

 

for specified PIDs (range: 0 to 100) to be collected at a user-

 

definable interval.

 

(See page 3-80.)

Input Card

Displays the relevant graphs and setup of any installed interface

 

card. (Only displayed if an interface card is present.)

 

(See page 3-107.)

* - licensed options (see Table 1-5: MTM400 Options Summary).

2-8

MTM400 MPEG Transport Stream Monitor User Manual