Device View

Time Zone

Monitoring devices across time zones may cause some confusion with respect to the timing of events. The displayed times at which log events occurred can be adjusted by making a selection from the Time Zone drop-down list at the top of the window. The following options are available:

Local

The time local to the machine on which MTM400 Remote User

 

Interface is currently running.

UTC

Universal Coordinated Time.

RTM Device

The time local to the RTM device being monitored.

Device Configuration

The Device Configuration screen allows you to configure items specific to the

MTM400 unit being monitored.

Figure 3-4: Device view - Configuration

Device Type: Displays the monitoring device type; this information is read from the unit being monitored.

Device Name: You can give the monitoring device a name, which is then displayed in the title bar of all screens. You need not enter a Device Name if the IP address of the device is displayed.

Enter the required name and select Set to activate it.

Network Settings…

Allows the network settings of the device to be reconfigured. (See Network Settings, page 3-7.)

3-6

MTM400 MPEG Transport Stream Monitor User Manual