Device View

Device Status

The Device Status option displays a screen that shows the status of MTM400 device events (as opposed to stream events).

Figure 3-2: Device view - Status

The events displayed will depend on the RTM device type; those currently shown for the MTM400 are as follows:

Any Device Error Provides an overview of the device error state, which includes the events shown in this panel.

Temperature

When active, indicates that the maximum temperature

 

monitored at the front panel and the processor board has

 

exceeded the safe operating limit.

Front Panel

When active, indicates that either the temperature at the front

 

panel has exceeded the safe operating limit, one or more of the

 

LEDs has failed, or the audible alarm is faulty.

Battery

When active, indicates that the configuration backup battery

 

on the TS Processor board has failed. In this case, all

 

configuration settings will be lost when power is removed

 

from the unit.

Time Source

When active, indicates that the time source selected in the Set

 

Time… section of the Device Configuration (see page 3-9)

 

has failed.

3-2

MTM400 MPEG Transport Stream Monitor User Manual

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - FAX 781.665.0780 - TestEquipmentDepot.com