Device View

Set Time

You can coordinate the time used by the RTM device and/or the remote user interface. (For a general description of the timing model, see Time Zones, page 2-13.)

Three time sources are available to the MTM400 from the Time Source drop-down menu.

Real Time Clock The MTM400 internal clock.

LTC

(Longitudinal Time Clock) An analogue format time clock

 

often available from a centralized source.

SNTP

(Simple Network Time Protocol) A UTC-synchronized time

 

clock available over the internet. Appropriate IP addresses of

 

time servers should be available from the System

 

Administrator.

ƒLocal time is the time being used by the remote user interface; it is the local PC time. It is referenced to UTC (Coordinated Universal Time) and may be offset to allow for local time variations, for example, British Summer Time = +60 minutes. The adjusted time is shown. Local time corresponds with the current Windows clock and time zone parameters.

ƒRTM Device time is the time being used by the RTM device; this may be in a completely different time zone. It is referenced to UTC (Coordinated

MTM400 MPEG Transport Stream Monitor User Manual

3-9