Stream View
Stream Bit Rate: The total bit rate of the stream.
Table
Each PID Group formed displays a title bar carrying the allocated name of the group. Each PID Group displays the following information:
State | Icon showing the state of the PID Group (whether the bit rate |
| limits are exceeded). |
Multiplex Occupancy:
A graphical representation of the total bit rate of the PID Group. The bar color indicates the error status of the PID Group. Superimposed on the bar are the Change Bar and (where set) the limits (see below). The graphic is displayed in the color according to whether there are any PID Group errors (that a set limit has been exceeded).
Bit Rate: The PID bit rate in bits per second.
Buttons
New PID Group…
Opens a new (empty) PID Group, after a name has been allocated.
Delete PID Group…
Displays a list of all PID Groups and allows one or more to be deleted.
Reset Change Bars
Resets the Change Bars of all programs.
Reset PID Group Occ Event
Resets all PID Group errors. Note that this also resets the individual PID errors.
Clear Limits | Resets and disables the Bit Rate Limits of all programs. |
PIDs… | (See PID Group Management, page |
The Stream Bit Rate shows the sum of the individual PID bit rates that make up the stream. The bit rate (Bit Rate) shown for each PID group, is the sum of the grouped PID bit rates.
MTM400 MPEG Transport Stream Monitor User Manual |