Interface Configuration and Interpretation

Equalizer The equalizer coefficients are plotted across the graph display. The display illustrates the presence of multi-path echoes by indicating how the equalizer is adjusting to cancel them out.

NOTE. The Equalizer graph amplitude values are only approximate.

Equivalent MERAn MER (Modulation Error Ratio) calculation is performed on the in-phase (I) data samples. The quadrature data samples are ignored in this calculation.

8PSK (Phase Shift Keying)

The 8PSK Settings dialog box is shown in the following screenshot:

Figure 3-48: 8PSK interface configuration (example)

For each of the settings, enter the required change and select Set to apply the new value.

NOTE. These settings can also be made from the Input Card screen.

MTM400 MPEG Transport Stream Monitor User Manual

3-129