Tektronix VX4101A - page 254

SCPI Commands for the Digital Input
3–140 VX4101A MultiPaq Instrument User Manual
TRIGger([:SEQuence1]|:STARt)[:LAYer]:DELay?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:ECOunt?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:HANDshake:POLarity
:REQuest?
:STRobe?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:MODE?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:SOURce?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:SOURce:CATAlog[ALL]?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:SOURce:CATalog:DELayable?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:SOURce:CATalog:FIXed?
Instrument
Command Values
<mask> #h00000000
<pattern> N/A
<time delay> 0 seconds
<event delay> 0 triggers (pass-through)
<polarity> INVerted
<mode> ALL
<source> IMMEDIATE
<mode> ONCE, ALL
Command Values
<mask> #h00000000 – #hffffffff
<pattern> #h00000000–#hffffffff
<time delay> 0 seconds=pass through
1E–06 to 65.535 E–03M in 1E–06 steps
<event delay> 0 = pass through, 1 to 65,535 triggers in step of 1
<polarity> NORMal|INVerted
<mode> ONCE, ALL
<source> BUS, TTLTRG0, TTLTRG1, TTLTRG2, TTLTRG3, TTLTRG4,
TTLTRG5, TTLTRG6, TTLTRG7, COMMAND0, COMMAND1,
COMMAND2, COMMAND3, COMMAND4, SUREPATH, DMM,
COUNTER, CTR_EXTARM, DAC, DIGI, DIGO, HANDSHAKE
Command Class
*RST Value
Limits