SCPI Commands for the SurePath Modules
3–262 VX4101A MultiPaq Instrument User Manual
It will continue this cycle until an abort, reset, or INIT:CONT OFF command is
received.
INITiate:IMMediate
This command initiates the current trigger sequence. After the instrument has
completed the current trigger sequence, it enters the idle state.
Command Response
INITiate:CONTinuous? 0 = continuous initiate not enabled
1 = continuous initiate enabled
See TRIGger([: SEQuence1] |:STARt) [:LAYer]:IMMediate command for an ex-
ample.
INSTrument Subsystem
The INSTrument commands control the current state of the modules. You can
cause the instrument to cease making measurements, and either return to its
default conditions or to retain the current setup.


N/A
Instrument
Valid Commands for all SurePathmodules
N/A
N/A
N/A
ABORt
INITiate
INITiate:CONTinuous
Query Response
Examples
Command Syntax
Query Syntax
Command Class
SurePath Module
Query Response
*RST Value
Limits
Related Commands