Tektronix VX4101A SCPI Commands for the Digital Output

VX4101A MultiPaq Instrument User Manual 3–147
SCPI Commands for the Digital Output
The Digital Output command syntax enables you to control the 32 output bits of
the instrument. The bits can be programmed with pattern segment lengths to a
maximum of 4096 sample points. If not all of the 32 bits are required, you can
use the commands to turn the appropriate bits on or off.
Command Summary
The following is a listing of the available command subsystems and syntax:
Commands
FORMat[:DATA] <format>
Queries
FORMat[:DATA]?
Commands
INITiate
:CONTinuous <control>
[:IMMediate]
Queries
INITiate:CONTinuous?
Commands
INSTrument:ABORt ([:IMMediate]|:COMPlete)
INSTrument:RESet
Commands
OUTPut:LEVel <voltage level>
OUTPut:TRIGger:SOURce <source>
FORMat Subsystem
INITiate Subsystem
INSTrument Subsystem
OUTPut Subsystem