Tektronix VX4101A SCPI Commands for the SurePath Modules

VX4101A MultiPaq Instrument User Manual 3–259
SCPI Commands for the SurePath Modules
This section lists the SCPI commands and queries for the SurePath Scanner
master. This section is not a comprehensive listing of all SurePathcommands.
The commands listed in this section apply specifically to the VX4330 120-Chan-
nel Relay Multiplexor Module. The commands active in your specific module
will vary with each model.
For commands specific to each individual SurePath module, consult the
appropriate Tektronix manual for that module.
Command Summary
The following is a listing of the available command subsystems and syntax:
Commands
INITiate
:CONTinuous [0|OFF|1|ON]
[:IMMediate]
Queries
INITiate:CONTinuous?
Commands
INSTrument:ABORt
INSTrument:RESet
Commands
[ROUTe:]CLOSe <channel list>
:DWELl <module name>, <nrf>
:MODE <mode>,<module_name>,<section_list>
[ROUTe:]Configure <configuration>,<module_name>,<section_list>
:DISJoin <module name>
:JOIN <module_name>,<section_list>
INITiate Subsystem
INSTrument Subsystem
ROUTe Subsystem