Tektronix VX4101A SCPI Commands for the Relay Drivers

VX4101A MultiPaq Instrument User Manual 3–197
SCPI Commands for the Relay Drivers
This section contains the SCPI commands for the Relay Drivers of the VX4101A
MultiPaqInstrument. You can use these commands to open and close relays,
direct signals through the 8 relay drivers, and inquire on device status.
Command Summary
The following lists the available commands for the relay drivers:
Commands
[ROUTe:]CLOSe <channel list>
[ROUTe:]OPEN <channel list>
Queries
[ROUTe:]CLOSe:STATe?
Queries
STATus:OPERation:CONDition?
ROUTe Subsystem
The ROUTe commands enable you to control signals through any or all of the
eight relay drivers.
[ROUTe:]CLOSe <channel list>
[ROUTe:]OPEN <channel list>
[ROUTe]:CLOSe:STATe?
N/A
Parameter Value
<channel list> N/A
STATe Open
ROUTe Subsystem
STATus Subsystem
Command Syntax
Query Syntax
*RST Value