SCPI Commands for the Digital Multimeter
3–238 VX4101A MultiPaq Instrument User Manual
NOTE. If the test fails, you can obtain further information on the failure with the
SYST:ERR? query.
Command Response
INSTRUMENT:SELECT DIGO Select the Digital Output
TEST:ALL? “Digital Output passes self test.”
Run self test.
READ? Subsystem
The READ queries enable you to initiate and acquire a measurement.
N/A
READ?
N/A
N/A
MEASure?
CONFigure
SENSe
INPUt
INITiate
FETCh?
N/A
READ?
The READ? query is a sub-level command of the measurement subsystem, as its
action is dependent on the configuration set up by the higher level MEASure,
CONFigure, and SENSe commands. It performs a measurement acquisition by
executing an INITiate:IMMediate command, followed by a FETCh? query. The
measurement function which is performed is based on the current configuration
set up by the higher level commands. For example, if a CONFig-
ure:ARRay:VOLTage:DC? 10,3.0 command was previously issued, a READ?
query would initiate, acquire, and return 10 DC V measurements in the 3.0 V
Examples
Command Syntax
Query Syntax
*RST Value
Limits
Related Commands
Command Description
Query Response