Teledyne M5000B operating instructions Appendix Models 5000B

Appendix Models 5000B

Typical Analytical Performance Specifications:

(will vary per application)

Accuracy:	±2% of full scale or better, application dependent
Noise:	Less than ±1%
Diurnal:	Less than 1% per 20oF (10oC (source/detector
	dependent)
Sample Cell:	Stainless steel with Sapphire window
	standard. Other materials available.
Cell Length:	.01 to 10 inches
Flow Rate:	50 to 1500 cc/min
Light Source:	TungstenMini-Lamp, optional Quartz Halogen
Sensitivity:	.015 to 3 absorbance units.
Reproducibility:	+/- 1% of scale or better
Filter Wavelength:	750nm to 5 microns, application dependant
Sample Pressure:	Sapphire window 250 psi
Response time:	Programmable

Other Specifications:

Ambient temp range: 32-122°F (0-50°C)

Internal calibration: Optical span flag/zero and span calibration

NOTE: 5000B/5020B (sample temperature sensing and output correction)

Power Rating: 115/230 VAC, 50/60 Hz, Approx 200 watts

Readout Device: Digital, 2 line alphanumeric vacuum fluorescent display, (VFD)

Analog Output Signal: 0-1 V (standard), 4-20mA isolated

Area Classification
Non-hazardous:Model 5000B
Hazardous / Explosion-proof:	Model 5020

5000B, 5020B Purge options:X, Y, Z purge, Cenelec IIB

AND H2 (PENDING) FOR ZONE I OR CLASS I, DIV I, B, C, D

AREAS

A-2 Teledyne Analytical Instruments