Teledyne M5000B operating instructions Logging Out

3 Operation/Control Unit Model 5000B

When you have finished typing the new password, press Enter. A verifica- tion screen appears. The screen will prompt you to retype your password for verification.

Enter PWD To Verify:

A A A

Use the arrow keys to retype your password and press Enter when finished. Your password will be stored in the microprocessor and the system will immediately switch to the Analyze screen, and you now have access to all instrument functions.

If all alarms are defeated, the Analyze screen appears as:

1.95ppm SO2

nR1: Ø — 1Ø Anlz

If an alarm is tripped, the second line will change to show which alarm

it is:

1.95ppm SO2

AL—1

NOTE: If you log off the system using the LOGOUT function in the system menu, you will now be required to re-enter the password to gain access to Alarm, and Range functions.

3.3.3Logging Out

The LOGOUT function provides a convenient means of leaving the analyzer in a password protected mode without having to shut the instrument off. By entering LOGOUT, you effectively log off the instrument leaving the system protected against use until the password is reentered. To log out, press the System button to enter the System function.

DIG_FILT SELF-TEST

PWD LOGOUT MORE

Use the < > arrow keys to position the blinking over the LOGOUT function, and press Enter to Log out. The screen will display the message:

Protected until password entered

3-8 Part I

Teledyne Analytical Instruments