Part I: Control Unit/Analysis Unit | Maintenance 3 | |
|
|
|
|
|
|
|
|
|
Preamp
0 OK
>0 means that some of the ten gains of the amplifier have a large offset. The number is a code that tells which of the ten gtains have the large offset.
Cell (detector)
0 OK
>0 means that the analyzer failed to balance the measuring and the reference signals, the larger the number the farther off they were.4.3 Major Internal Components
The major components in the Control Unit are shown in Figure
Figure 4-3: Control Unit Major Internal Components
Teledyne Analytical Instruments | Part I: |
