Texas Instruments MSC1210 manual 1.Timer/Counter 2 Control Bits, Register Bit Toggle Box Name

Timer 2

17.3 Timer 2

Timer/Counter 2 is quite different from the two other timers. The operation mode is determined by the status of one or more of the register bits displayed in Table 17−1.

Table 17−1.Timer/Counter 2 Control Bits

Register Bit	Toggle Box Name
T2CON.TR2	TR2
T2CON.C/T2	TC/T
T2CON.CP/RL2	CP/RL2
T2CON.EXEN2	EXEN2
T2CON.TCLK	TCLK
T2CON.RCLK	RCLK

Figure 17−6. Timer/Counter 2

The hexadecimal equivalent of the bit pattern created by toggling the individual bits is displayed in the editable text display, T2CON. Writing a number into this window will correctly program the states of the respective bit; the same way it would program the individual bits of the device’s T2CON register.

By the same token, the checked or cleared state of the T2EX, T2 Pin, TF2 and EXF2 boxes have the same effects on, or are affected the same way by the P1.T2EX, T2CON.T2, T2CON.TF2 and T2CON.EXF2 pins respectively, as discussed earlier.

The values and the implications of the contents of the editable text windows T2 and RCAP2 are consistent with those of the actual device registers in the MSC1210 system.

Keil Simulator 17-11