Toshiba B-SA4TP, BSA4TMGS12QMR Feed Amount Fine Adjustment, Cut/Strip Position Fine Adjustment

2. PRINTER SETUP

ENGLISH VERSION EO1-33048

2.10 Position and Print Tone Fine Adjustment

2.10Position and Print Tone Fine Adjustment (Cont.)

<3>ADJUST SET

[PAUSE]

<3>ADJUST SET FEED ADJ.+10.0mm

[PAUSE]

<3>ADJUST SET CUT ADJ. +10.0mm

[PAUSE]

<3>ADJUST SET BACK ADJ. +5.0mm

[PAUSE]

<3>ADJUST SET

X ADJUST +50.0mm

[PAUSE]

The Parameter Fine Adjustment Mode contains sub menus for adjusting a print start position, cut/strip position, print tone, ribbon motor torque, and setting the threshold.

Each time the [PAUSE] key is pressed, the sub menus are displayed sequentially.

Feed Amount Fine Adjustment:

Feed amount to the print start position is fine adjusted.

Cut/Strip Position Fine Adjustment:

Cut position or strip position is fine adjusted.

Reverse Feed Amount Fine Adjustment:

Reverse feed amount is fine adjusted.

X-coordinate Fine Adjustment:

X-coordinate of a print position is fine adjusted.

<3>ADJUST SET TONE ADJ.<T> +3

[PAUSE]

<3>ADJUST SET TONE ADJ.<D> -2

[PAUSE]

<3>ADJUST SET RBN ADJ <FW> -10

[PAUSE]

<3>ADJUST SET RBN ADJ <BK> -5

[PAUSE]

<3>ADJUST SET THRESHOLD<R>1.0V

[PAUSE]

<3>ADJUST SET THRESHOLD<T>1.4V

[PAUSE]

Print Tone Fine Adjustment (Thermal transfer):

Print tone is fine adjusted for thermal transfer mode.

Print Tone Fine Adjustment (Thermal direct):

Print tone is fine adjusted for thermal direct mode.

Ribbon Motor Drive Voltage Fine Adjustment (Take-up motor):

Drive voltage of the ribbon take-up motor is fine adjusted.

Ribbon Motor Drive Voltage Fine Adjustment (Feed motor)

Drive voltage of the ribbon feed motor is fine adjusted.

Threshold Fine Adjustment (Black mark sensor):

Threshold for the black mark sensor is fine adjusted. See Section 2.11.

Threshold Fine Adjustment (Feed gap sensor):

Threshold for the feed gap sensor is fine adjusted. See Section 2.11.

NOTE:

The printer driver’s properties screen also has Parameter Fine Adjustment menu.

E2-51