2.PRINTER SETUP
ENGLISH VERSION
2.11 Threshold Setting
2.11Threshold Setting (Cont.)
PAUSE
B-SA4T V1.0
R
ONLINE
B-SA4T V1.0
7.Select the sensor to be adjusted by using the [FEED] key.
REFLECTIVE |
|
|
| TRANSMISSIVE |
| [FEED] |
| ||
|
| |||
|
|
| ||
Black mark sensor |
|
|
| Feed gap sensor |
8.Press and hold the [PAUSE] key until more than 1.5 labels (tags) have been issued.
The media will continue to be fed until the [PAUSE] key is released. (An automatic threshold setting for the selected sensor is completed by this operation.)
NOTES:
1.Failure to feed more than 1.5 labels may result in an incorrect threshold setting.
2.While the Top Cover is raised, the [PAUSE] key does not work.
9.Press the [RESTART] key.
10.The printer returns to online mode.
Send an issue command from the host computer to the printer.
NOTE:
A paper end error cannot be detected during paper feed.
