2. PRINTER SETUP
ENGLISH VERSION
2.7 Setting an Operating Environment
2.7.2Parameter Setting (Cont.)
Serial (RS-232C) Interface
NOTES:
1. When using the hardware flow |
(5) Flow Control
This parameter is to choose a flow control of the
As “XON+READ AUTO” has been chosen as default, change it in accordance with your PC.
control, the control signals and |
data must be in pairs between |
the printer and the PC. |
Printer |
| Host |
TD | → | RD |
RD | ←- | TD |
RTS | → | CTS |
CTS | ←- | RTS |
DSR | → | DTR |
DTR | ←- | DSR |
[RESTART]
[FEED]
<2>PARAMETER SET XON+READY AUTO
XON/XOFF AUTO
XON+READY AUTO
READY/BUSY
XON/XOFF
READY/BUSY RTS
Refer to the
2.Be careful that there are two types of
Use a straight cable for this printer.
LCD Message Language
XON/XOFF AUTO: XON/XOFF mode (Software Flow Control)
XON+READY AUTO: XON/XOFF + READY/BUSY (DTR) mode
| (Software & DTR/DSR Hardware Flow |
| Control) |
READY/BUSY: | READY/BUSY (DTR) mode |
| (DTR/DSR Hardware Flow Control) |
XON/XOFF: | XON/XOFF mode (Software Flow Control) |
READY/BUSY RTS: | RTS mode (CTS/RTS Hardware Flow |
| Control) |
After making a choice, press the [PAUSE] key.
This parameter is to choose a language of the LCD Message Display. As “ENGLISH” has been chosen as default, change it as you like.
[RESTART]
[FEED]
<2>PARAMETER SET LCD ENGLISH
ENGLISH
ITALIAN
JAPANESE
SPANISH
DUTCH
FRENCH
GERMAN
After making a choice, press the [PAUSE] key.
