Manuals / Toshiba / Computer Equipment / Printer

Toshiba B-SA4TM-GS12-QM-R, B-SA4TP, BSA4TMGS12QMR manual Product Overview, Introduction Features

Models: B-SA4TP B-SA4TM-GS12-QM-R BSA4TMGS12QMR

1 113

Download 113 pages 21.72 Kb

Page 9

1. PRODUCT OVERVIEW

ENGLISH VERSION EO1-33048

1.1 Introduction

1. PRODUCT OVERVIEW

1.1 Introduction

Thank you for choosing the TOSHIBA B-SA4TP series thermal printer. This Owner’s Manual contains from general set-up through how to confirm the printer operation using an online test print, and should be read carefully to help gain maximum performance and life from your printer. For most queries please refer to this manual and keep it safe for future reference. Please contact your TOSHIBA TEC representative for further information concerning this manual.

1.2 Features	This printer has the following features:
	• Space-saving design
	An area required to place a printer is about A4 size, in spite of both
	media and ribbon being loaded inside it. Also, the Top Cover is opened
	upward, which saves the installation space.
	The optional cutter module and strip module are as slim and small as
	the Front Cover.
	• Various kinds of interface
	Various kinds of interface are provided:
	<Standard>		<Option>
	• Parallel		• Serial
	• USB		• Wireless LAN
	• Built-in LAN		• RFID
	• Superior hardware
	Clear print is realized by an 8 dots/mm (203 dpi) (B-SA4TP-GS12) or
	11.8 dots/mm (300 dpi) (B-SA4TP-TS12) print head, at a printing
	speed of 50.8 mm/sec. (2 inches/sec.), 101.6 mm/sec. (4 inches/sec.), or
	152.4 mm/sec. (6 inches/sec.)
	• Easy maintenance
	Design of the printer is simple. Especially, attachment and removal of
	the print head and platen are very simple, which makes maintenance
	easy.
	• A variety of options
	The following optional devices are available:
	•	Cutter module
	•	Strip module
	•	Serial interface board
	•	Wireless LAN board
	•	RFID module
	•	300-dpi print head

E1- 1

Image 9

Toshiba B-SA4TM-GS12-QM-R, B-SA4TP, BSA4TMGS12QMR manual Product Overview, Introduction Features

Contents

SA4TP Series Vorsicht CE Compliance for EU only SA4TP Series Waste Recycling information for users Meanings of Each Symbol Safety Summary Request Regarding Maintenance Precautions Table of Contents EA2-1 EA1-1EA3-1 EA4-1 Product Overview Introduction Features Accessories Appearance DimensionsFront View Rear View Interior Operation Panel Option Name Type Usage Options Setup Flow Printer SetupProcedure Reference Installation Connecting the Power CordExample of US Type Take out the Media Holder Ass’y from the printer Loading the MediaRaise the Release Lever and remove the Media Holder Left Insert the Media Shaft into the core of a media roll Place the Media Holder Ass’y into the printer Fold the Release Lever to lock the Media Holder Left Click Upper Sensor Upper SensorLever Ass’y Setting the Feed Gap Sensor position Setting the Black Mark Sensor position Strip mode Option Batch mode Press down the Release Bar to open the Strip Unit Cut mode Option Label or Thin mediaTag paper or Thick paper Loading the Ribbon Open the Ribbon Cover Gently close the Top Cover until it clicks Cont Connecting the Printer to Your Host Computer Turning the Printer Refer to .3 Reset Fine AdjustmentRefer to the B-SA4T Series Key Operation How to Enter the System Mode Parameter SettingSA4T Baud rate selection Baud Rate „ Serial RS-232C Interface „ Serial RS-232C Interface Data Length Stop BitParity „ LCD Message Language Flow ControlREADY/BUSY XON/XOFF „ Parallel Centronics Interface „ Web Printer Function when using TCP/IP LAN „ Plug & Play IP Address Setting TCP/IP This section, how to set the IP address is described IP Address SettingPress the Pause key to enter the IP Address Setting Mode TCP/IP This parameter is to set an IP address Printer IP Address This parameter is to set a Gateway IP address Gateway IP AddressSubnet Mask This parameter is to set a Subnet Mask This parameter is to enable Dhcp Socket PortDhcp Dhcp Client ID This parameter is to set a Dhcp client IDAscii code and Hex. code correspondence table Installing the Printer Drivers IntroductionGeneral Description Parallel Interface Installing the Printer Driver Windows 95/98/Me Windows NT4.0 Windows 2000/XP Windows 98/Me USB Interface E2-36 E2-37 E2-38 Finish button E2-40 E2-41 E2-42 Uninstalling the Printer Driver Adding a LAN Port Windows 95/98/ME Adding/Deleting a LAN Port Deleting a LAN Port Windows NT4.0/2000/XP Others Printer Driver Upgrades Using the Printer Driver Adjustment Print TestPrint Method When using an optional Cutter Module or Strip Module 3ADJUST SET Position and Print Tone Fine Adjustment Cut/Strip Position Fine Adjustment Feed Amount Fine AdjustmentReverse Feed Amount Fine Adjustment Coordinate Fine Adjustment When setting +0.0 mm Position and PrintTone Fine Example of Cut Position Fine Adjustment Example of Strip Position Fine Adjustment Example of Reverse Feed Amount Fine Adjustment When setting +50.0 mm When setting -50.0 mm Print Tone Fine Adjustment Ribbon Motor Voltage Fine Adjustment Sensor type is displayed Threshold Setting Select the sensor to be adjusted by using the Feed key Feed and Pause keys Press the Pause key to enter the Sensor Adjustment Mode „ When using the Black Mark Sensor „ When using the Feed Gap Sensor „ Storing a No Media Level Voltage „ Manual Threshold Setting Black Mark Sensor Feed Gap Sensor Operation Panel On Line OperationUsed to stop printing temporarily Used to restart printing Reset OperationPress and hold the Restart key for 3 seconds or longer Maintenance CleaningPrint Head/Platen/ Sensors Print Head/Platen/ Sensors Covers and Panels Optional Cutter Module 1. Open the Front Cover Same way, clean the outside of the Cutter Blade Backing Paper Feed Roller Strip Roller Guide Roller Troubleshooting Error MessagesRestart key Error Messages Problems/Cause Possible Problems Causes Solutions Possible Problems Do not use any tool that may damage the Print Head Removing Jammed Media Printer Specifications This section describes the printer specificationsModel Mail 4STATE Customer CODE, RSS14 Media Supply SpecificationsMedia Type Label Detection Area of the Transmissive Sensor LabelTag paper with square holes Effective Print Area Detection Area of the Reflective Sensor Ribbon Recommended Media and Ribbon TypesMedia type Description Ribbon type Description Care/Handling of Media and RibbonCombination of Media and Ribbon Media type Vellum paper and label Symbols in the message Appendix 1 Messages and LedsROM Base LAN Board is being initialised When the Dhcp function is enabledDhcp client is being initialized Printer did not succeed in writing data Following message appears Parallel interface Centronics Appendix 2 Interface PIN Connector IEEE802.3 10BASE-T/100BASE-TX Awid MPR-1510A-RM SA704-RFID-U1-USSA704-RFID-U1-EU Awid MPR-1580A-RM Snmp Wireless LAN Option Appendix 3 Power Cord When purchasing the power cordAt least, 125% of the rated current of the product Appendix 4 Print Samples Appendix 4 Print Samples JAN13, EAN13 Interleaved 2EAN13+2 digits EAN13+5 digits Industrial 2 UPC-A+5 digitsCustomer bar code KIX Code Appendix 5 Glossaries Device used to remove labels from the backing paper Media and ribbonUSB Universal Serial Bus Index Index EO1-33048