Installing Net Phone• Start by checking to see that Net Server is installed and is operating on a Server PC
on the network. Version 4.3.36 minimum is required for the V oIP audio capabilities
to work. Take note of the “Network Name” of this server PC. This “Network
Name” would be: 1) The NET BIOS name if the target PC is on the same LAN
segment; 2) Or the complete domain name if reaching across a router or over a
WAN .
•Run the Netphone_xxx.exe program to install Net Phone on the target PC. This
opens the Installation Wizard (shown below), which will direct you through the
following steps.
Figure 2 Strata Net Phone Installation Wizard