EDGE ERASE

If the original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case, set the edge erase. A white border is created along the edges of the copy, eliminating those black stains.

This function is available only in the case of standard-size originals.

1

Place paper in the drawer(s).

When using this mode in bypass copying ( P.85), be sure to specify the paper size.

2

Place the original(s).

3

Press the [EDIT] button to enter the edit menu, and then press the

[EDGE ERASE] button.

 

 

 

 

 

 

 

 

4 Adjust the width by pressing the [2 mm] or [50 mm] button, and then press the [ENTER] button.

yThe default width of the white border is 5 mm.

ySelect other copy modes as required.

5 Press the [START] button.

EDGE ERASE 163

Page 165
Image 165
Toshiba e-STUDIO2500c/3500c/3510c manual Edge Erase button