4 IMAGE ADJUSTMENT

RGB Adjustment

This function allows you to adjust an overall colour balance of the copied image by changing the strength of red (R), green (G) and blue (B) at the time of scanning.

This function is available only in the full colour mode and the auto colour mode.

1 Place paper in the drawer(s).

2 Place the original(s).

3 Press the [IMAGE] button to enter the image menu, and then press the [RGB ADJUSTMENT] button.

4

Press the or

 

button of the colour to obtain the desired colour

 

balance. Then press the [ENTER] button.

 

 

 

 

 

 

 

 

 

 

 

 

y” at the centre of each colour bar denotes its default setting.

yPressing the button strengthens the adjusted colour, and pressing the button weakens it.

ySelect other copy modes as required.

5 Press the [START] button.

Cancelling RGB adjustment

Move the indicator of the colour whose adjustment you want to cancel its adjustment to by

your pressing the or button, and then press the [ENTER] button.

If you want to cancel the adjustment of all colours, press the [DEFAULT] button, and then press the [ENTER] button.

142 RGB Adjustment

Page 144
Image 144
Toshiba e-STUDIO2500c/3500c/3510c manual RGB Adjustment, Balance. Then press the Enter button, Cancelling RGB adjustment