2 HOW TO MAKE COPIES
80 Making Copies
When you copy by placing originals on the original glass (e.g. using the sort mode, or
making 1-sided original 2-sided copies), the data of these originals are scanned into the
memory. In this case, proceed to steps 5 and 6.
5
Place the next original, and press the [START] button.
yData scanning of this original starts.
yThe next original will also be scanned in the same manner when you press the [YES]
button on the touch panel, and then press the [START] button on the control panel.
yRepeat the above procedure until the scanning of the last page of the original fin-
ishes.
6
When scanning of all pages has finished, press the [FINISHED] but-
ton on the touch panel.
Copying starts. The paper exits with its copied side down.
yWhen the drawer runs out of paper during copying, the corresponding drawer on the
touch panel and the [JOB STATUS] button on the control panel blink. Add paper to
this drawer or select another one with the same paper size.
yBe careful because the paper exit area and paper just after exiting are hot.
4
Press the [START] button.
Copying starts.