10 WHEN THIS MESSAGE APPEARS

“Check staple cartridge in the Saddle Stitch Unit”

This message will be shown only if the Saddle Stitch Finisher (optional) is installed. When the staples in the stapler of the Saddle Stitch Finisher run out, this message appears.

Replace the staple cartridge according to the following procedure.

1 Openisher. the front cover of the fin-

2 Slide the Saddle Stitch Unit carefully toward the front.

3

Pull the handle of the stapler of

the Saddle Stitch Unit toward

you to unlock it. Then turn the stapler clockwise for about 60 degrees.

The stapler will be locked and will not be turned any further when it becomes almost horizontal.

2

1

348 “Check staple cartridge in the Saddle Stitch Unit”

Page 350
Image 350
Toshiba e-STUDIO2500c/3500c/3510c manual Check staple cartridge in the Saddle Stitch Unit, Saddle Stitch Unit toward