Toshiba e-STUDIO2500c/3500c/3510c manual Press the Start button on the control panel

2 HOW TO MAKE COPIES

yWhen you want to make 1-sided copies on THICK2, THICK3, SPECIAL1 or SPECIAL2 paper, select (FRONT) for the paper. Select (BACK) for making 2-sided copies on that paper.

e.g.: When making a 2-sided copy on a THICK3 paper

1.Place a sheet of THICK3 paper on the bypass tray.

2.Select THICK3 (FRONT) and make a 1-sided copy.

3.Place the paper copied at step 2 on the bypass tray again with its blank side face down.

If you place the paper on the bypass tray with its top to bottom direction unchanged, the original is copied in 'open to left', and if you place it with its top to bottom direction changed, the original is copied in 'open to top'.

4.Select THICK3 (BACK) and make a copy.

-When you want to make 2-sided copies on PLAIN, RECYCLED PAPER or THICK1, use the Automatic Duplexing Unit of the equipment.

-OHP films cannot be copied 2-sided.

yThe paper type which has been set can be confirmed with the touch panel.

PLAIN	--	TRANSPARENCY
THICK1		RECYCLED PAPER
THICK2 (FRONT)		SPECIAL1 (FRONT)
THICK2 (BACK)		SPECIAL1 (BACK)
THICK3 (FRONT)		SPECIAL2 (FRONT)
THICK3 (BACK)		SPECIAL2 (BACK)

6 Press the [START] button on the control panel.

When you copy on OHP films, remove the copied OHP films, which have exited on to the receiving tray one by one. When the films pile up, they may become curled and may not be projected properly.

88 Bypass Copying