Toshiba e-STUDIO2500c/3500c/3510c manual Saddle Stitch Finisher MJ-1030, Hole Punch Unit MJ-6101

8.Saddle Stitch Finisher (MJ-1030)

This finisher enables saddle stitching, in addition to sort/group finishing and stapling. The Hole Punch Unit (optional, MJ-6004) can be installed to this finisher. The Bridge Unit (optional, KN-3500) is required for the installation of this finisher.

9.Hole Punch Unit (MJ-6101)

This unit enables you to punch holes on printouts. It can be used by installing it on the Fin- isher (MJ-1101).

10.Hole Punch Unit (MJ-6004)

This unit enables you to punch holes on printouts. It can be used by installing it on the Fin- isher (MJ-1030).

Other options available are as follows. Contact your service technician or Toshiba product dis- tributors for details.

Work Table (KK-3511)

This is a small table for placing originals while the equipment is operated.

yInstalled on the right-hand side of the equipment

yCannot be installed with e-BRIDGE ID Gate at the same time

FAX Unit (GD-1210)

This is a unit for using the equipment as a Fax.

yInstalled inside of the equipment

2nd Line for Fax Unit (GD-1160)

This unit enables to add a line to the Fax to make it 2nd line.

yInstalled inside of the equipment

yThe Fax Unit (GD-1210) is necessary.

Data Overwrite Kit (GP-1060)

This is a kit to delete the temporarily stored data when copy, print, scan, Fax, internet Fax and network Fax are performed.

yInstalled inside of the equipment

512 MB Expansion Memory (GC-1250)

This memory enables the B4, A3 and FOLIO (LD, LG, 13" LG, COMP) size originals to be scanned with the slim PDF format.

yInstalled inside of the equipment

256 MB Expansion Memory (GC-1260)

This memory enables scanning in the full colour, auto colour and image smoothing mode with 600 dpi.

yInstalled inside of the equipment

Wireless LAN Module (GN-1041)

This module enables the equipment to be used in a wireless LAN environment.

yInstalled inside of the equipment

yThe Antenna (GN-3010) is necessary.

yThe equipment cannot be connected to the wireless and wired LAN at the same time.

Bluetooth Module (GN-2010)

This module enables the Bluetooth printing.

yInstalled inside of the equipment

yThe Antenna (GN-3010) is necessary.

Description of Each Component 35