Toshiba e-STUDIO2500c/3500c/3510c manual Other points

Other points

yMake sure that there is enough space around the system to facilitate changing of parts, maintenance and clearing paper jam.

If there is insufficient space, some operations, such as bypass feeding, will become difficult and the Multifunctional Digital Colour Systems could even break down.

To insure optimal operation, allow clearances of at least 80 cm on the right, and 10 cm on the left and behind.

10cm

10cm

80cm

yBe sure to fix the power cable securely so that no one trips over it.

yAdverse environmental conditions may affect the safe operation and performance of the Mul- tifunctional Digital Colour Systems, and the Multifunctional Digital Colour Systems could break down.

-Avoid locations near windows or with exposure to direct sunlight.

-Avoid locations with drastic temperature fluctuations.

-Avoid too much dust.

-Avoid location that suffer from vibration.

yAllow the air to flow freely and make sure there is a ventilator.

With inadequate ventilation, the unpleasant odor released by ozone will begin to dominate the atmosphere.

When using the Multifunctional Digital Colour Systems

Warning

yDo not place metallic objects or containers with water (flower vases, coffee cups, etc.) on or near the Multifunctional Digital Colour Systems. And keep paper clips and staples away from the air vent. This could cause a fire or give you an electric shock.

yIf the Multifunctional Digital Colour Systems becomes excessively hot, smoke comes out of it or there is an odd smell or noise, proceed as follows.

Turn the main switch OFF and remove the plug from the outlet, then contact your service representative.

yIf the Multifunctional Digital Colour Systems will not be used for more than one month, remove the plug from the outlet for safety purposes during that time.

This could cause a fire or give you an electric shock if an insulation failure occurs.

General Precautions 23