Toshiba e-STUDIO2500c/3500c/3510c manual Placing paper in the Large Capacity Feeder optional

Placing paper in the Large Capacity Feeder (optional)

1 Pull out the Large Capacity Feeder carefully.

Pull out the drawer until it comes to a stop.

2 Place paper in A and B.

A

B

yPlace paper with its copy side up. (The copy side may be described on the wrapping paper.)

y For the maximum number of sheets that can be set, see P.54 “Acceptable copy paper”.

yBe sure that the paper height does not exceed the line indicated on the side guide.

yFan and jog the paper well before placing it on the drawer. Set the paper for A to the right side, and set that for B to the left side. (The paper can be set neatly if you pile it up gradually and alternately in A and B.) Be sure that the centre lever is not open (see the labels attached in the Large Capacity Feeder).

yPaper starts being fed out of the elevator tray (A) at first. When the paper on A has run out, the paper on B moves to the position of A and starts being fed.

yDo not use wrinkled, folded or damp sheets of paper.

3	Push the drawer of the Large Capacity Feeder straight into the
	equipment until it comes to a stop.
	Close the drawer completely. The elevator tray automatically moves up to the paper
	feeding position.
	Be careful not to let your fingers be caught when closing the drawer. This could injure
	you.
4	To change the paper type, see	P.61 “Changing the setting of
	paper size”.

Preparation 3- Setting Copy Paper 65