Toshiba e-STUDIO2500c/3500c/3510c Setting copy paper size change, Placing paper in the drawer

1 BEFORE USING EQUIPMENT

Setting copy paper (size change)

When you set or add copy paper in the drawer, follow the procedure below.

Placing paper in the drawer

1 Turn the power on.

2 Pull out the drawer carefully until it comes to a stop.

3 Push the lower part of the end guide in the direction of the arrow to remove it, then rein- stall it at the desired paper size (indicated on the bottom inner surface on the drawer).

4	Push the arrow part (right side)
	of the side guide to unlock it.

56 Preparation 3- Setting Copy Paper