2 HOW TO MAKE COPIES

3 Select the copy modes as required. When you want to copy more than one set, key in the desired number of copies.

yPress the [CLEAR] button on the control panel to correct the number keyed in.

y Note that some combinations of copy modes are restricted. ( P.389 “Copying Func-

tion Combination Matrix”,

P.391 “Image Quality Adjustment Combination Matrix”)

yOnce the [START] button on the control panel is pressed, any change in copy modes (including setting of the previously divided sets of originals) cannot be applied after- ward.

4 Press the [START] button.

y Copying starts. The paper exits with its copied side down.

yWhen the drawer runs out of paper

during copying, the corresponding drawer on the touch panel and the [JOB STATUS] button on the control panel blink. Add paper to this drawer or select another one with the same paper size.

yBe careful because the paper exit area and paper just after exiting are hot.

78 Making Copies

Page 80
Image 80
Toshiba e-STUDIO2500c/3500c/3510c manual Press the Start button