Toshiba e-STUDIO2500c/3500c/3510c manual Functions cannot be set, Image density is too low

11 MAINTENANCE

Functions cannot be set

Item to be checked	Countermeasure	Reference page
Are there functions that cannot	See the copying function combi-	P.389 “Copying Function Com-
be combined set together?	nation and image quality adjust-	bination Matrix”, P.391 “Image
	ment combination matrices, and	Quality Adjustment Combination
	then set them again.	Matrix”

Image density is too low

Item to be checked	Countermeasure	Reference page
Is the message to replace the	Replace the toner cartridge.	P.302	“Replace Toner Car-
toner cartridge displayed on the		tridge Symbol”
touch panel?
Is the level of the colour adjust-	Use the manual density buttons	P.136	“Copy Density Adjust-
ment set suitably?	or the background adjustment	ment”,	P.144 “Background
	function to adjust the image den-	Adjustment”
	sity properly.

Image density is too high

Item to be checked	Countermeasure	Reference page
Is the level of the colour adjust-	Use the manual density buttons	P.136 “Copy Density Adjust-
ment set suitably?	or the background adjustment	ment”, P.144 “Background
	function to adjust the image den-	Adjustment”
	sity properly.

Image trouble

Phenomenon	Usual cause	Countermeasure
The copied image is stained.	The Automatic Document	Lower them fully to block outside light.
	Feeder (optional) or the
	Platen Cover (optional) is not
	lowered fully.
	The original glass, platen	Clean them.
	sheet, scanning area or	P.374 “Daily Inspection”
	guides are dirty.
	The copy density is set	Make the density lighter if you use the
	darker.	manual copy density mode. Or use the
		automatic copy density mode.
	A highly transparent original	Place a blank sheet of paper, the same
	is used.	size as the original or larger, over the orig-
		inal.

376 Simple Troubleshooting