Toshiba e-STUDIO2500c/3500c/3510c manual Continuous feed mode

Continuous feed mode

1 Align all the originals. Then place them face up and align the side guides to the original length.

y Place the originals straight along the side guides.

yCollate the originals in the order that you want them to be copied. The top sheet of the originals will be fed first.

y This mode is also available for one- sheet originals.

yRegardless of their sizes, originals are acceptable up to 100 sheets (50 to 80 g/m2) or 16 mm in height.

yFor mixed-size originals, see

P.101 “Copying mixed-sized originals in one operation (mixed original size)”.

yUse the original stopper as required.

yTo replace the original stopper, lift it slightly and push it in.

When the number of originals is too large to be set at one time, you can previously divide the originals into several sets to copy them continuously. To do so, place the first set of the originals and press the [CONTINUE] button on the touch panel while the data of this set are being scanned. When this scanning has finished, set the next set of the originals and press the [START] button on the control panel.

Setting Originals 73