Toshiba FS-2600-1 DP# 1 ST 0311 #, ST Vegetable ST, ST 100 # AT/TL, Item Corr ALL Void AT/TL

5. PROGRAMMING OPERATIONS EO1-11138

5.4 How to Access a Program Item

NOTE: You can use a maximum of 99 departments. The memories of the departments 1 to 30 have already been opened before delivery of the register.

If you want to open a memory and use a department other than the departments 1 to 30, enter a department code you want to designate, then depress the [DP#] key in the key sequence of the Department Table Programming. The memory of the department will be opened automatically.

When you only want to open a memory other than the departments 1 to 30, operate as follows.

3 [X] Department Code [DP#]

[AT/TL]

Repeatable for another department
ex.) To program the following to a department code 1.
Department Code 1:	Address 1 (Major Group/Minor Group):			03/11
	Address 2 (Name):			VEGETABLE
	Address 3 (Status 1):			0 (no ON-status)
	Address 4 (Status 2):			7 (Sales data outputted to RKP3)
	Address 5 (Tax Status):			2 (Tax 2 taxable)
	Address 6 (High Amount Limit):			5000 ($50.00)
	Address 7 (Low Amount Limit):			100 ($1.00)
Mode Lock: SET
Enter 3, depress [X].
1 [DP#] 1 [ST] 0311 [#]	(2 [ST]) VEGETABLE [ST]
(3 [ST]) 0 [#] (4 [ST]) 7 [#] (5 [ST]) 2 [#] (6 [ST]) 5000 [#]			(7 [ST]) 100 [#] [AT/TL]
				Journal Print
		P03	DEPARTMENT
		01 DP01
			#01		0311
			#02 DP01VEGETABLE
			#03		0
			#04		7
			#05		2
			#06		50.00
			#07		1.00
				0433	16:35TM

•Deletion

CONDITION	After Department Daily & GT and PLU Daily and GT Reset
OPERATION	Mode Lock: SET
Individual Department Deletion
3 [X]	[ITEM CORR]	Department Code [DP#]	[AT/TL]

Repeatable for another department to be deleted.

All Department Deletion

3 [X] [ITEM CORR] [ALL VOID] [AT/TL]

5-16