Toshiba FS-2600-1 owner manual Master and Backup Master Alternation

9. MASTER AND BACKUP MASTER ALTERNATION EO1-11138

10. MASTER AND BACKUP MASTER ALTERNATION

9.MASTER AND BACKUP MASTER ALTERNATION

The Backup Master Terminal can be changed to be used as the Master Terminal for an accident that the Master Terminal becomes down, etc. And the Master Terminal can be changed to be used as the Backup Master when it comes back from repair, etc.

To switch from the Backup Master Terminal function to the Master Terminal function:

1Disconnect the master terminal from the line.

2When other terminals are in registration operation, finalize and cashier sign-off, or Cashier Key to OFF operations should be performed.

Since a transmission error occurs at this time, an inquiry job should be completed.

3Change the backup master terminal address from 2 (BM) to 1 (M). (Therefore, the backup master terminal will function as the master terminal.)

Refer to Terminal ID Setting (Submode 77) on Chapter 3.

4Delete the backup master terminal from the terminal connection table on the master terminal. (Reprogramming is required.)

Refer to Terminal Connection Table Setting (Submode 69) on Chapter 3.

5Download the terminal connection table.

The following files are guaranteed when the recovery process is performed. If a file is used in another terminal when the master terminal goes down, however, data stored in the terminal is not guaranteed.

•Files controlled in the master terminal (cashier file, etc.)

•PC transmission information

The following files and data are lost when the master terminal goes down.

•Transaction file for data capture

•Files controlled locally on the master terminal

•Data in the files which are used by other terminals when the master terminal goes down.

9-1