Toshiba FS-2600-1 owner manual Printer Table Setting Contents, To on Connection

5. PROGRAMMING OPERATIONS

EO1-11138

5.4 How to Access a Program Item

			Printer Table Setting Contents
Address No.			Description of Programming Contents
1, 3		Destination of Output
		Destination of data output is as follows.
			1: Receipt	4: RKP 3
			2: RKP 1	5: RKP 4
			3: RKP 2	6: Journal
		Terminal ID/Port No.
		Enter a 2-digit terminal ID No. and a 1-digit port No.
		NOTE:	If your system is the standalone system, enter only a 1-digit port No.
2, 4		Destination of Output
		Destination of data output is as follows.
			1: Receipt	4: RKP 3
			2: RKP 1	5: RKP 4
			3: RKP 2	6: Journal
		Connection Status
		Connection status is as follows.
			0: OFF (Disconnection)	1: ON (Connection)
		NOTE:	When a terminal ID/port No. is entered, a connection status will be automatically set
			to “ON” (Connection).
5		Port No.
		Port No. is as follows.
			1: Port 1
			2: Port 2
			3: Port 3 (Hardware Option)
		Printer
		A printer connectable is as follows.
			1: TM-300 (Receipt, RKP 1 to 4, Journal)		3: BRST-10 (Receipt)
			2: TM-T88 (Receipt, RKP 1 to 4)		0: None
6		Port No.
		Port No. is as follows.
			1: Port 1
			2: Port 2
			3: Port 3 (Hardware Option)
		Transmission Speed
			0: 19200 bps	1: 9600 bps
ex.) To set the following to a printer table 1.
Printer Table 1			Address 1 (Destination of Output):		1 (Receipt)/1 (Port 1)
					2 (RKP 1)/2 (Port 2)
					6 (Journal)/2 (Port 2)
			Address 2 (Connection Status):		1: ON for all the destinations
			Address 5 (Printer):		1 (Port 1) for 3 (BRST-10)
					2 (Port 2) for 1 (TM-300)
Mode Lock: SET
Enter 71, depress [X].
1 [NS]	1 [ST] 1 [#]		(2 [ST]) 2 [#] 6 [ST] 2 [#]	2 [NS] 1 [ST] 1 [#] (2 [ST]) 1 [#] 6 [ST] 1 [#] 5 [NS]
1 [ST]	3 [#]	(2 [ST])	1 [#] [AT/TL]

5-57