Toshiba FS-2600-1 owner manual Conditions required on terminals for In-line Report takings

2. READ AND RESET REPORTS

EO1-11138

2.2 In-line Reports

The key operation for each In-line Report is the same as the corresponding terminal report available on the standalone ECR. However, the key operation can be executed only on the Master Terminal while the [RTR] key is turned on.

Conditions required on terminals for In-line Report takings:

Read/Reset Reports (Daily or GT)

Master Terminal: Any time outside a sale

Satellite Terminals: Signed-OFF condition (Code Entry Method)

Lock Positions Required:

Master Terminal: Mode Lock: X/RTR Declaration: ON

Mode Lock: Z/RTR Declaration: ON

Satellite Terminals: Any positions

WARNING!

When opening the cash drawer, be careful not to let the drawer hit any person.

OPERATION FLOW OF IN-LINE READ OR RESET REPORTS

To be operated on the

Master Terminal only

Designating	Designating Some Terminals
All Terminals
	[#]

Store/Register No. of the terminal to be designated (max. 6 digits)

[#]

[AT/TL]

Report Taking Operation for Each Report (see the following pages).

Each Terminals Report Data Collection Process

Repeat for	Refer to
all the
	Chapter 1
terminals to
be designated.

Refer to the following pages.

When the option Individual Terminal	In other cases
Data Report Issue is selected.
(applicable to Financial Reports only).

Each Terminals

Data Print (from

Master Terminal)

Incomplete Ending:	Also refer to Retry,
	Suspending, and
Uncollected	Cancel operations.
	Refer to
Terminals
	Chapter 11.
Store/Register
No. Print

Normal Ending

Consolidated

Data Report

End

2-2