Toshiba FS-2600-1 Major Group Name Programming Submode, Major Group Code ST Character Entries ST

5. PROGRAMMING OPERATIONS EO1-11138

5.4 How to Access a Program Item

■Major Group Name Programming (Submode 14)

This programming is used to set each major group name. Association among a department, a minor group and a major group should be set in the Department Table Programming (Submode 3).

CONDITION	Any time outside a sale	When you enter 14 and depress the [X] key,
		the screen shown below will appear.
OPERATION	Mode Lock: SET

*SET *02-06-199912:34

PROGRAMMING MAJOR 01 MGP01

02 MGP02

03 MGP03

04 MGP04

05 MGP05

06 MGP06

07 MGP07

08 MGP08

↓

Please input item No.

0.00

Pg up Pg dw Enter −

↓

14[X] Major Group Code [ST]

(1 to 10)

*

Character Entries [ST]

(See NOTE)

[AT/TL]

Repeat for other groups	* (For sequentially programming Group Codes
(max. 10 groups)	and Names, the code specification can be skipped.)

ex.) To set “OTHER” for a major group10

Mode Lock: SET

Enter 14, depress [X].

10 [ST] OTHER [ST] [AT/TL]

Journal Print

P14 MAJOR

10 OTHER

0030 20:48TM

NOTE: A maximum of 12 regular-sized characters may be set for each Major Group name. One double-sized character occupies two regular-sized character’s space. Also see the CHARACTER ENTRIES at the beginning of this chapter. If no name is programmed for a Major Group, an auto-preset data is assigned as the Major Group Name (MGPxx; xx = Major Group Code 01 to 10).

5-30