Toshiba FS-2600-1 owner manual P30 RKP Message, Programmable

5. PROGRAMMING OPERATIONS EO1-11138

5.4 How to Access a Program Item

■RKP Message Programming (Submode 30)

This programming is used to set 20 RKP messages (a maximum of 20 characters x 2 lines for each), and also used to designate an RKP on which each message is outputted. If your printer is the TM-300, you can select a color for each message.

CONDITION	Any time outside a sale	When you enter 30 and depress the [X] key,
		the screen shown below will appear.
OPERATION	Mode Lock: SET

*SET *02-06-199912:34

PROGRAMMING RKP MESSAGE 01

02

03

04

05

06

07

08

↓

Please input item No.

0.00

Pg up Pg dw Enter −

↓

30 [X] Message No.

1 to 20

[NS]	1	[ST]
	Address 1: Guest Name
	2	[ST]
	Address 1: Guest Name
	3	[ST]
	Address 1: Guest Name
	4	[ST]

1st Line Message Entries [ST]

Max. 20 characters

Initial Setting: Blank for all characters

2nd Line Message Entries [ST]

Max. 20 characters

Initial Setting: Blank for all characters

RKP No. of the destination [#]

Max. 4 digits: Multiple RKPs are selectable.

(NOTE 2 below) Initial Setting: RKP No. 1

Color [#]

0:Black (Initial Setting)

1:Red

Repeat for another message.

[AT/TL]

ex.) To set the following to the RKP message 1.

• 1st Line: 20 RKP MESSAGES ARE

•2nd Line: PROGRAMMABLE!

•Destination: 13 (RKP Nos. 1 and 3)

Mode Lock: SET

Enter 30, depress [X].

1 [NS] 1 [ST] 20 [SPACE] RKP [SPACE] MESSAGES [SPACE] ARE [SPACE] [ST] (2 [ST]) PROGRAMMABLE! [ST] (3 [ST]) 13 [#] [AT/TL]

Journal Print

P30 RKP MESSAGE

01

#01 20 RKP MESSAGES ARE

#02	PROGRAMMABLE!
#03		13
	0051	17:01TM

NOTES: 1. When you fill one whole line with all blanks, it will result in a one line space.

2.When you want to designate the RKP Nos. 1 and 3 as the destinations, enter 13, then depress the [#] key.

5-39