Toshiba FS-2600-1 How to verify a Programmed Data through the Keyboard, 1 AT/TL, 0 AT/TL, Plu

6. VERIFICATION OF PROGRAMMED DATA

EO1-11138

6.2 How to verify a Programmed Data through the Keyboard

6.2How to verify a Programmed Data through the Keyboard

You can directly access an item you want to verify through a key operation on the keyboard while the mode lock position is in “SET” or “X”.

■To read out the data of programming operations with a Submode No., first enter “1,” then each Submode No., and finally depress the [AT/TL] key.

For example, to read the programmed data entered in Submode 1 (Store Name/Message, Commercial Message, Footer Logo Message Programming), operate:

1 0 1 [AT/TL]

Submode No. (In case of a 1-digit number, add a “0” on top to be a 2-digit number.)

Always attach “1” to the Program Submode No. for reading data.

NOTE: Key operations to verify time, date, PLU stock are not provided.

■To verify the data of the address “100 MISC”:

1 0 0 [AT/TL]

■To designate a zone for the PLU table verification:

1 0 4	[ST]	Zone-start	[X]
		PLU Code

■To verify a PLU table data by “Simple” format: 1 0 4 [PLU]

Zone-end

PLU Code

[PLU]

NOTE: To verify the PLU preset-code keys programmed on ECR Keyboard phase Nos. 2 to 5: 127 [ST] 2 to 5 [AT/TL]

6-2