Toshiba FS-2600-1 owner manual PLU Preset-code Key/Display Key Setting Submode, P27 PLU KEY

5. PROGRAMMING OPERATIONS EO1-11138

5.4 How to Access a Program Item

■PLU Preset-code Key/Display Key Setting (Submode 27)

This programming is used to assign a PLU code to each PLU Preset-code key (SFKC 96), and also used to assign a display menu table No. to each display key (SFKC 210). You can assign a maximum of 5 different PLU codes or 5 different display menu table Nos. to one key of the keyboard.

CONDITION	Any time outside a sale	When you enter 27 and depress the [X] key,
		the screen shown below will appear.

OPERATION Mode Lock: SET

* SET *02-06-199912:34

PROGRAMMING PLU KEY 01 02 03 04 05

S1

Please input item No.

0.00

27[X] Keyboard No. [ST] PLU Code or Display Menu Table No. [KEY] [AT/TL]

1: ECR Keyboard 1	Max. 6 digits for PLU Code	Depress
2: ECR Keyboard 2	1 to 99 for Display Menu Table No.	the
3: ECR Keyboard 3	(Enter 0 to close a key)	required
4: ECR Keyboard 4		key on
5: ECR Keyboard 5		the ECR
		Keyboard.
	Repeat for other Keys.

ex.) To assign the PLU code 9 to the required key on the ECR Keyboard 2 and the display menu table No. 2 to the required key on the ECR Keyboard 5.

Mode Lock: SET

Enter 27, depress [X].

2 [ST] 9 [required key of SFKC 96] 5 [ST] 2 [required key of SFKC 210] [AT/TL]

Journal Print

Keyboard Phase No.

Location Code (left); refer to REMARK on the next page. PLU Code assigned to a key (right)

P27 PLU KEY

2

PLU

#103 000009 5

DISPLAY

#075 02

0046 16:21TM

NOTES: 1. When an entry of PLU code or display menu table No. is skipped and a [KEY] is simply depressed in the above key operation, the preprogrammed PLU code or display menu table No. of the KEY will be displayed.

2.If “0” is entered as PLU Code or display menu table No. in the above sequence, the KEY will be closed. Pressing the closed KEY in sale entry will be ignored.

3.The five phases of the keyboard can be shifted by the [MENU] keys in actual sales transaction.

5-36