Toshiba FS-2600-1 owner manual Terminal ID Setting Submode, Mode Lock SET for other terminals

3. PROGRAMMING OPERATIONS EO1-11138

3.2 Programming Operations Added for In-line Terminals

3.2.2Terminal ID Setting (Submode 77)

This submode is available for in-line terminals (including the master and backup master terminals) . It must be operated separately on each terminal since the Terminal ID should vary from terminal to terminal. The data set in this submode is used as the in-line address of the terminal for in-line service operations.

CONDITION	Any time outside a sale
OPERATION	Mode Lock: SET and RTR Declaration is ON (for the Master Terminal)
	Mode Lock: SET (for other terminals)
	(Use the SET Mode Keyboard Sheet after depressing the [RTR] key on the REG Mode
	Keyboard Sheet.)

Through the Operator Display

Select “1 PROGRAMMING”.

* SET *02-06-199903:04

RTR

1PROGRAMMING

2PROGRAM READ

3PROGRAM DLL

Please select operation by Enter key.

				0.00
		TOTAL		0.00
Pg up	Pg dw	Enter	−		↓

⎯⎯⎯→

Select “77 INLINE ID”.

*SET *02-06-199903:04

PROGRAMMING

68	PC COMM	T/M DESIGN
69	CONNECT REG
70	INLINE COMM

71PRINTER

73PRICE CHG

77INLINE ID

78LOGO

TAX TABLE

Please select operation by Enter key.

				0.00
Pg up	Pg dw	Enter	−		↓

Through the Keyboard

77 [X] Terminal ID No. [AT/TL]

1:Master

2:Backup Master 3 to 16: Satellites

ex.) To assign Terminal ID No. 4 to a satellite terminal of the in-line system:

Mode Lock: SET

77 [X] 4 [AT/TL]

Journal Print
12-25-1999 SAT		#3001
P77 INLINE ID		04
INLINE ID
0196	01:52TM

NOTE: Be certain not to set the same terminal ID No. to terminals on the in-line system.

If terminals with the same ID No. exist on the in-line system, malfunction may occur.

3-4