Toshiba GD-1260, GD-1250 Redial function, Batch transmission function, Sending the next original

2 SENDING/RECEIVING A FAX

Redial function

In the memory transmission mode, if the fax cannot be sent due to a busy-line, the fax number is redialed automatically to send the fax. By default, this equipment redials 3 times at 1-minute intervals.

Batch transmission function

If there are multiple transmission jobs to the same recipient in memory, you can send them at once using this function, resulting in reduction of communication costs. However, if their recipients are the same but their transmission conditions vary or if users or departments are different when this equipment is managed under the department management or user management, this function is not applied to those reserved jobs.

Sending the next original

If an original is placed on the original glass and its scanning is completed, the confirmation screen for the next original is displayed. If you want to continue scanning of the next original, place it on the original glass, and then press the [START] button on the control panel. Once all the originals are scanned, press [JOB FINISH]. If you place an original on the RADF (Reversing Automatic Document Feeder) and press the [CONTINUE] button during scanning, the confirmation screen for the next original can be displayed after the scanning is completed.

yIf you leave the screen unattended for approximately 45 sec., the scanned originals are sent.

yTo cancel the transmission in the memory transmission mode, press [JOB CANCEL].

P.49 “Canceling the memory transmission”

yTo change the transmission conditions for each page, press [OPTION]. P.30 “Changing the settings for each page”

22 Sending a Fax