Toshiba GD-1250, GD-1260, GD-1270 manual Duplex Print, Rotate Sort

6 SETTING ITEMS

DUPLEX PRINT

You can switch duplex printing ON or OFF. With it being set to ON, received documents are printed on both sides of paper.

yDuplex printing is available only if the received fax sizes and resolution are the same.

yWhen paper has run out during duplex printing, the rest of the documents are printed on another size paper.

yWhen the received fax is printed on 2 sheets of paper because it exceeds the printing area, duplex printing is not available.

yDocuments received using the batch transmission function are printed on both sides of the paper as one continuous document. Pay attention to the separation of the individual documents particularly those consisting of an odd number of pages.

yEven when duplex printing is set to ON, the document printed using the reception forward function is printed on a single side of paper.

yDuplex printing direction differs depending on the received document size, as shown in the figures below. Received LD, LG, LT, A3, A4, or B4-sized documents are printed so that they can be bound along the long edge of the direction. (Figure 1)

Received ST, A5 or B5-sized documents are printed so that they can be bound along the short edge of the direction. (Figure 2)

1

A

2

A

ROTATE SORT

You can switch the rotate sort function ON or OFF. With this being set to ON, received faxes are alternately sorted horizontally and vertically for each fax job.

yRotate Sort is available only for LT/A4-sized paper. Set the LT and LT-R, or A4 and A4-R drawers.

yIf paper runs out during Rotate Sort, the rest of the documents are printed on the remaining paper. If no copy paper remains, printing is performed on a larger size than A4/A4-R or LT/LT-R.

Administrator Settings 107