Toshiba MA-1595-1 Amount to be cashed, Card Slide Input the Pin No. from, Pin Pad. Then depress

4. OPERATIONS IN “ - ” MODE EO1-11152

4.4 Electronic Fund Transfer (EFT) Operation In “ - “ Mode

(3)Cashing Debit Refund

This operation is performed for canceling debit cashing transactions.

OPERATION
Amount to be cashed		[DEBIT]	Card Slide	Input the Pin No. from the
	Max. 7 digits	or		Pin Pad. Then depress the
		[EBT CASH]		[ENTER] key.
	EFT terminal responds “APPROVAL”.		Customer Receipt Print		Store Receipt Print

NOTES: 1. Before performing this operation, the [DEBIT] (or [EBT CASH]) key should be programmed with the status “no-purchase cashing is allowed”. Also each EFT Media Key should be programmed with the statuses both “with EFT process” and “off line authorization is available”. Failure to do this may cause an error.

2.When automatic issuance of store receipt has been programmed, only the store receipt is issued after registering in the Receipt OFF mode. When manual issuance of store receipt has been programmed, only the store receipt is issued with the [STORE RECEIPT] key.

3.Receipt post-Issue operation after the Cashing Debit Refund is unavailable.

4.Key operation on the ECR is unavailable during the inquiry to the host.

5.The Endorsement Print can be performed.

6.Training Cashiers are unacceptable to the EFT terminal.

7.Issuance of the Store Receipt is selectable.

8.When manual issuance of store receipt has been programmed, the store receipt must be issued to perform next transaction or read/reset jobs.

9.The Validation Print operation is not possible.

10.EFT cashing operation with the [CREDIT], [CHECK], and [EBT F/S] keys is not possible.

4- 4