Toshiba MA-1595-1 owner manual Cashier Code and Name Programming Submode, CLK key

6. PROGRAMMING OPERATIONS EO1-11152

6.5 Cashier Code and Name Programming (Submode 2)

6.5Cashier Code and Name Programming (Submode 2)

Cashier Code and Name, and Cashier Status for each cashier can be programmed here.

6.5.1 Programming

CONDITION	Any time outside a sale
OPERATION	Mode Lock: SET
2 [X]		Cashier Code [NS]

Repeat for another cashier.

(See NOTE 1 below.)

Address 1: Cashier Name

	1 [ST]	Character entries		[ST]
		Max. 12 characters
		(See NOTE 2 below.)
Address 2: Cashier Status		For sequentially programming the address,
		the Address number specification can be skipped.
	2 [ST]		Cashier Status [#]
			0: Cashier for sale entries
			1: Cashier for training entries (NOTE 3)

[AT/TL] (To complete this submode.)

NOTES: 1. The following table shows the Cashier Codes that can be entered (the capacity is determined by the RAM Allocation Setting).

		Standard memory	Expansion memory
Code entry type		1 to 15	1 to 99
Cashier key type	[CLK] key	1 to 8, 99*	---

*The Cashier Code 99 for the Cashier Key Type is fixed as a code of a cashier for Training Entries.

2.For the name of each cashier, a maximum of 12 regular-sized or 6 double-sized characters can be entered. A combination of both types is also available.

3.Training entry status is available for every cashier.

4.When the center file is used, this programming cannot be performed on the Satellite Terminal.

5.Prior to the change of cashier status (Normal cashier → Training cashier, or Training cashier → Normal cashier), daily reports and GT reports of this cashier should be taken.

6-11