Toshiba MA-1595-1 owner manual Department Table Programming Submode

6. PROGRAMMING OPERATIONS EO1-11152

6.6 PLU Table Programming (Submode 4)

6.6Department Table Programming (Submode 3)

For each department, memory opening, department name and various statuses settings are performed here.

6.6.1Programming

CONDITION

OPERATION

To change the positive/negative status:

After Department and PLU Daily and GT Resets

To change any other programmed data or to newly program departments: Any time outside a sale

Mode Lock: SET

As for details of each Address, refer to the							(See NOTE 2.)
following pages.								[DEPT]
3 [X]			Address Numbers [#]			Department Code				[DP#]
				(See NOTE 1.)
					for sequential-coded Dept. only
		Address 1: Link Group					Major GP Minor GP [#]
				1 [ST]
							(01 to 10)		(01 to 30)
		Address 2: Department Name
				2 [ST]			Character Entries				[ST]
							Max. 16 characters
		Address 3: Preset Price
				3 [ST]			Price [#]
							(Max. 6 digits)
	Repeat for	Address 4: Status Code 1
	any			4 [ST]			Status Codes to ON [#]
	address
	within the
	same
	dept. by	Address 5: Status Code 2
	re-entry			5 [ST]			Status Codes to ON [#]
	for
	correction.
	(NOTE 3)	Address 6: Tax Status
Repeat for
other				6 [ST]			Status Codes [#]
departments.							(Max. 4 digits)
		Address 7: High Amount Limit
				7 [ST]			High Amount to be locked out [#]
								(Max.7 digits)
		Address 8: Low Amount Limit
				8 [ST]			Low Amount to be locked out [#]
								(Max.7 digits)
		Address 9: Sub-link Dept. Code
				9 [ST]			Sub-link Dept. Code [#]
								(1 to 99)
				[AT/TL] (To complete this submode.)

6-13