Toshiba MA-1595-1 owner manual Head-Link Plu Sub-Link Plu

6. PROGRAMMING OPERATIONS EO1-11152

6.7 PLU Table Programming (Submode 4)

PLU TABLE PROGRAMMING CONTENTS (continued)

Address No. Description of Programming Contents

7Unit Price of Individual Split Package

•The unit price of individual split package can be programmed regardless of the HI-CONE status.

•For preset the unit price of individual split package, enter a maximum of 6-digit price, and depress [#].

•To cancel the unit price of individual split package, enter 0 and depress [#].

(When the unit price of individual split package is not preset (or 0), whole package price (Address 3 setting) will be used in the registration.

•When HI-CONE PLU is entered as an open-price PLU, use the unit price of whole package instead of that of individual split package.

8Whole Package Quantity (for Split Package Pricing PLUs)

[#]

Enter the whole package quantity in max. 2 digits (1 to 99), or enter 0 to cancel the Split Package Pricing status. Be sure to set a whole package quantity here for PLUs with HI-CONE Status (Address 4 - Code 6) or Mix & Match Group No. (Address 13).

NOTES: 1. This setting is not allowed for PLUs with the Scale-compulsory status.

2.When the option “Preset Point for one decimal digit” is selected, this setting is not allowed to any PLUs. (For details, please contact your nearest TOSHIBA TEC representative.)

9PLU Group No. (for purposes of reports)

•Enter a 2-digit code (1 to 99) as a PLU Group No. to which the PLU belongs, and depress [#]. To cancel the Group No. once set, enter 0 and depress [#].

•For HASH PLU, the PLU Group No. setting is available.

10Link-PLU Table No. (for PLU-to-PLU linking requirement only)

•This entry is useful, similar to the “Sub-link Dept.” feature in the Department Table Programming operation, when the PLU item entry should always be followed by another PLU item sale. If the PLU is not applied to this case, skip this address entry. Refer to the following examples of applications:

	HEAD-LINK PLU	SUB-LINK PLU
Example 1)	PLU 1 (Drink Small	PLU 2 (Bottle Deposit for the
	Bottle Net Content at $0.45	small bottle at $0.05
Example 2)	PLU 101 (Battery-drive	PLU 202 (Battery-drive Pack
	Clock at $20.00)	at $1.50)

As shown in the examples, this feature prevents the cashier from forgetting to enter the Sub- link PLU item attached to the Head-link PLU item. And at the same time, in reports, two PLU Totals are separately read.

• In setting, enter the Link-PLU Table No. (1 to 99) and then depress [#].

[#]

1 to 99 (Link-PLU Table No. The Sub-link PLU which link to the Link-PLU Table will be programmed in a separate programming operation later.)

• To cancel the sub-linking, enter 0 instead of the Link-PLU Table No. before [#].

6-25