6. PROGRAMMING OPERATIONS EO1-11152
6.11 Customer File Code (Check Track No.) and Name Setting (Submode 15)
6-34
Example) To set the Amount Limits of the following items:
Key Code Amount Limit Set Values
2 ([CHK TND]) $ 99.99 9999
11 (Common High) $ 999.99 100000
12 (Common Low) $ 0.01 1
Key Operation: Mode Lock: SET, Enter 8 and depress the [X] key.
2 [ST] Item Code for Check Media Key
9999 [#] Amount Limit Set Value
11 [ST] Item Code for Common High Limit for all depts.
100000 [#] Amount Limit Set Value
12 [ST] Item Code for Common Low Limit for all depts.
1 [#] Amount Limit Set Value
[AT/TL] To complete this submode
This submode creates files for customers whose sales are to be processed using the chec k track memory.
Any time outside a sale
Mode Lock: SET
15 [X] | Customer File Code | [ST] Character Entries [ST] [AT/TL]
NOTES:
1. The Customer F ile codes that are programmed in this submode will be acces sed by entering the code and
depressing the [PICK UP BAL] key for a sale entry in a charge posting operation in the REG or MGR mode.
At this time, the balance of the new customer assigned with the code will s how zero which will be printe d as
the previous balance line. On finalizing the sale, the new balance will be printed at the bottom of t he receipt,
which will be stored in the same Customer File Code memory area. Thus the op erator alway s use the [PIC K
UP BAL] key for both starting a new customer’s account and at recalling the customer’s balance.
2. If all the programmed Customer File Codes are us ed up and a new customer file code is required to be
opened during the business hours, the [CODE OPEN] key may be used. When a new code is entered,
followed by [CODE OPEN], the code is printed as the previous balance line item with the balance zero o n the
receipt, and at the same time, the code is added to the lis t of the Customer Fil e Codes programmed in the
above operation of Submode 15. However, the use of the [CODE OPEN] key ca n be programm ed to requ ire
Manager Intervention, which can control the operator’s opening of a new custom er file cod e outside t he list o f
the Customer File Codes programmed in Submode 15.
3. W hen the Standard Memory is used, a maximum of 1000 Customer F ile Codes can be programme d. When
the Expansion Memory is used, a maximum of 3,000 Customer File Codes can be progr ammed. However,
the actual maximum number of Customer Files varies depending on the RAM allocation.
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
08-25-2003 MON #0
P08
#02 CHECK 99.99
#11 1000.00
#12 0.01
0035 13:16TM
Max. 16 characters for
the Customer’s Name
Max. 12 digits
(1 to 999999999999)
Repeat for other codes
* For sequentially programming codes,
the code specification can be skipped.)
When no name is to be programmed
for the code
OPERATION
CONDITION