6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR

EO1-11152

6.1 Installing/Replacing the Receipt/Journal Roll

2

1

2.Pull up the Printer Release Lever to open the Receipt Cover Frame Ass’y.

3.Remove the old Receipt Roll, if any. Unstick the end of the Receipt, and then load the Receipt Roll into the printer.

4.Pull the end of receipt roll forward until the area with the glue on the paper is past the Cutter Block.

5.Close the Reciept Cover Frame Ass’y by pusing the shadowed portion until it clicks.

6. Attach the Printer Cover.

6- 3

Page 18
Image 18
Toshiba MA-1595-1 owner manual Outline of Preparation Procedure Before Operating the ECR